Title here
Summary here
Connect a mobile device
Requirements
- you have already deployed a PiRogue online
- your PiRogue operates on the mode Wireguard
- the Wireguard application is already installed on the mobile device (Android or iOS)
🤔 Not done yet? Check the documentation.
... in 4 steps
Create a new Wireguard peer
To create a new Wireguard peer allowing a device to connect to the VPN network of the PiRogue, use the following command:
pirogue-admin-client vpn add-peerℹ️ Get the list of Wireguard peers
To get the list of already configured peers, use the command:
pirogue-admin-client vpn list-peersExample:
pi@pirogue ➜
# Example of list of Wireguard peers
pi@pirogue ➜
pirogue-admin-client vpn list-peers
- idx: 2 private_key: oA3PBMH5yhBCIykx1odFPbnH+QKq18FBPmdPU1MrmEQ= public_key: hdlwEsh7SQ0lEPC5Qpl66y9slJkhH4wUYEpzvkEq6V4= - idx: 3 private_key: YGe5EF//sIj6QF/2sglmx20b7jxgxFpV1sl8hXBDy34= public_key: 8lSksu3/HF8vCGi5lCOktI3C9L68PsfNhzDwyuAtMQ0=
pi@pirogue ➜
|
ℹ️ Delete a Wireguard peer
To delete a peer, you have to specify its index (idx):
pirogue-admin-client vpn delete-peer [peer ID]Get the configuration of a Wireguard peer
To connect a peer to the Wireguard VPN, you first need to get its configuration. The peer configuration is returned by the command. You have to specify the ID of the peer you have previously created:
pirogue-admin-client vpn get-peer-config [peer ID]ℹ️ Example of peer configuration
pi@pirogue ➜
# Example of peer configuration
pi@pirogue ➜
pirogue-admin-client vpn get-peer-config 3
[Interface] Address = 10.8.0.3/24 PrivateKey = YGe5EF//sIj6QF/2sglmx20b7jxgxFpV1sl8hXBDy34= DNS = 10.8.0.1[Peer] EndPoint = 185.199.111.153:51820 PublicKey = YxtvfgfpgCpkQKTI9vcVz0LnXGHIwF83Z65OBWw4F0A= AllowedIPs = 0.0.0.0/0 PersistentKeepAlive = 20
pi@pirogue ➜
|
ℹ️ Save the peer configuration in a file
To save the configuration of the peer in a .conf file to be loaded on the device, use the command:
pirogue-admin-client vpn get-peer-config [peer ID] > my-peer-[peer ID].confSecurity concerns
Never share the configuration of a peer publicly. The configuration of a peer contains very sensitive information such as the IP address of your PiRogue and the private key of the peer. If you have any doubts, delete the peer and create it again.
Generate only one configuration per device, and never use the same configuration on multiple devices.
Connect the mobile device by scanning the QR-code
Make sure the Wireguard application is already installed on the mobile device. Then, generate the QR-code and scan it with the Wireguard app:
pirogue-admin-client vpn get-peer-config [peer ID] | qrencode -t ansiutf8ℹ️ Example of QR-code to scan with the Wireguard app
pi@pirogue ➜
# Example of QR-code of the configuration for peer 2
pi@pirogue ➜
pirogue-admin-client vpn get-peer-config 2 | qrencode -t ansiutf8
█████████████████████████████████████████████████████████████████ █████████████████████████████████████████████████████████████████ ████ ▄▄▄▄▄ █▄▀▀█▄▀▄ ▄▀ ▄▄▄▄▄ █▄█ ▄▄██▄▄ ██▄▄▀▀█ ▄ ██ ▄▄▄▄▄ ████ ████ █ █ █ █ ██▄██▄▀▄▄▀▀▀▀▀█▀█▄▀▄█▄ █▀ ▄▄▄█▀▀▄▀▄ ██ █ █ ████ ████ █▄▄▄█ █▄▀▄ ██▄▀▀▄█ ▀▀█ █▀ ▄▄▄ █▀█▄█▀▀▄▀ █ █ ▀▄██ █▄▄▄█ ████ ████▄▄▄▄▄▄▄█▄█▄█ ▀ █▄█▄▀▄▀▄▀▄█ █▄█ ▀ █▄█ █▄▀ ▀ ▀ ▀▄▀▄█▄▄▄▄▄▄▄████ ████ ▄ ▀▀▄▀ ▀█▀▀▄▀▀ ▀██▄█ █ ▄ ▄ ▄ ▄ ▀▀█▄█▀▀██▀ █▀█▄▀█▄▄▄▀ ████ ████▀▄ ▄▄▀▄▀█▄ ▄ ▀▀▄ █ ▄▄█▄ ▄█ ▄▄█ ▄ ▄▀ █ █▄█▄▄▄██▄▀██▄▀▄█▀████ ████▀▀█▀ ▄▄▀██▀██▄ █ █▄▀▄█▄▀███▀ ▀▄██ █▄▄█▄▀ ██ ▄▀▄█▀█▀▀ ▄█████ █████▄██▀ ▄█▄██▀█▄█ ▄██████▄ █ ▀█▄█▄▄▀█▄▀███▄█▄▀▄▀▄ ██ █ ▄██▄████ ████▀▄▀▀█ ▄█▄▀▄█ █▀▄▄▀█ █ ▀▀▀ ▄█▀█ ██ ▀ ▄██▄▀█ █▄██ █▀▄▄██████ ████ █ ▄▀█▄ ██▄██▀▀█▀█▄█▄ ▀ ███ ▄▀█▀█▀▄▀ ▄▄▄▄▄▀▀█▀█▀ ▀▄▄▀ █▄████ ████▄ ▀█ █▄▄▄█▄█ ██ ▀███▄ ▀█ ▄▀▄▀▀ ▄▀██▀▄▄█▄▀█▀█▄▄ ▄▀ ██ ▄████ ████▄█▄ ▄▀▄▀▀█▀██ ▀▀▄▄▀ ▄ █ ▄▄▄███▀█▄▀ █▀█▄▄▄▄▄ ▀████ ▄▄████ ████ █▄▄▄▄▄ ▄ █ ██▄██▀▀▄▀ ▀▀██▀ ▀ ▀▀█▄████ ▄ ▄█▀▄█▄▄ ▄ ▀ █████ ████▀▄▀█ ▄▄▄ ▄█▀▄█▄▀ ▄▄█ █▄▀▀ ▄▄▄ ▄▀█ ██▄▀▀█ ▄▀ ▄▄▄ ▀▄▀████ ████▄ █ █▄█ ▀▄▄█ ▀▄██▄▀▄▀▀▀▄▄ █▄█ █▀▀▀▄█▀█▀▀▄█▀▀ ▀ █▄█ ▄▄ ████ ████▄▄▄▄ ▄▄ ▄ ▄█▄ ██▀ ▄▀ ▀▄ ▄▄ ▀███▀██▀█ ██▀▄▄ ▄▄▄ ▄██ ████ ████▀█▀▄▀▀▄ ▀▄▄ ▀▄ ▄█ ▀ █▀▄▀ ▀█▀█▄▄▀█▄ ▀▀▄ ▄█ ▄ █▄▀█▄█▀█ █████ ████▀▄▀█▀█▄▀ ▄▀ ▀▄▀█▄ █▀▄▄ ▄█▄▄ ▄▀▄▀▀▄ ▀▀▄█▀ ▀▀▄▄▀█ ▀▄▄█▀████ ████ ▄█▀▄▄ █ ▄▀▄ ███▀▀███ ▄▀▀███ █▄▀▀▄▄▀ ▄▀▄▄█▄▀▀▄█▀▄ ▀█▀▀████ █████▀█▀▀ ▄▄▀ █▀█▄ ▄▄█ ▀▀▄▀▄▀ ██ ▀ ▄▄█▄▄█▀▄▄ █▄█▀ ██▄█▄▄█████ ████▀██▄ █▄█▄▄██▀▀ ▄█ ▀▀██▄█▄▀▄█▄▄▀▀███▄▀▀▀▀▀▄██ ▄ ▄██▄█▀▀ █ ████ ████ █ ▀▄▄▀█▀▄ ▄▀█▀█▄▄▄█ █ ▀▀▄▀▄█▄██▄▀▀ ▄▀ █▀█ ▄█ █████████ ████▄▀▀▄▄█▄▀█▄▀█▀█ █ ▀▀▄ ██ ▄▀▀ █▀▄█▀▀█ ▀█▀█▄▀ ▄█▄▀ ▄ ▀▄▄ ██████ ████ ▀ ▀▀▄▄▀▀█▄ █ ▀▄▀ █▀▄▄▄█▄█▄▄ ▀██▀▄ ▀ █ ▄ ▄ █ ▀█▀█ ▀▄ ████ ██████████▄▄ ▄█ ▀█▄█▄▀ ▀█▄ ▀█ ▄▄▄ ▀ ▀█▄█▄▀ ▄▀▀▀█ █ ▄▄▄ █▄█████ ████ ▄▄▄▄▄ ███▄▄▄█▀ ████ █▀█ ▄ █▄█ █ ▀▀▀▄███▄ ▀▀▄▄ █▄█ ▀▄▄ ████ ████ █ █ █▀ ▄ █ ▄▀█ █ ▄ █ ▀▄▄ ▄▄█▀▄▀▄▀ ▄█▀▄▄ ▄▄█ ▄▄▄▄▄██▀▄████ ████ █▄▄▄█ █ ▄▀ ▀██ ▄▄▄▀█▀█▀▀ █▀▀▄▀█ ▄█ ▀ ▀▀█ ▀▄ ▀▀▄▀██▀██▀████ ████▄▄▄▄▄▄▄█▄█▄▄██▄▄▄███▄██▄▄▄███▄█▄██████▄███▄▄██▄▄▄▄▄▄▄█▄██████ █████████████████████████████████████████████████████████████████ █████████████████████████████████████████████████████████████████
pi@pirogue ➜
|
Take a screenshot of the QR-code and send it (via encrypted email or Signal) to the person who needs to connect to the VPN of your PiRogue.
Identify Wireguard peers
The Wireguard peers configured on your PiRogue are not named, a peer is identified by its ID only. If you want to associate a peer to an individual, you have to store this information separately, ideally not on your PiRogue. We suggest you keep track of the peers the following way:
| Date | Peer ID | Peer IP address | Individual |
|---|---|---|---|
| 2024-10-23 | 2 | 10.8.0.2 | John |
| 2024-10-23 | 3 | 10.8.0.3 | Lea |
| 2024-10-27 | 6 | 10.8.0.9 | Camilla |
ℹ️ How to find the IP address of a peer
The IP address of a peer is specified in the configuration of each peer, it corresponds to the Address. It’s specified using CIDR notation, ignore the value after the /.
In this example, we want to get the IP address of peer 2.
pi@pirogue ➜
# Example of getting the IP address of peer 2
pi@pirogue ➜
pirogue-admin-client vpn get-peer-config 2
[Interface] Address = 10.8.0.2/24 <--- IP address of peer 2 PrivateKey = WLzm+auxiGXJJDf/74TsS4hnAU4mViJxR8XfpJUviW0= DNS = 10.8.0.1[Peer] EndPoint = 51.159.150.9:51820 PublicKey = dQzDsS2BQPjNjI2PG4hGAQX7AQ2xhFZnuMvV2beLj30= AllowedIPs = 0.0.0.0/0 PersistentKeepAlive = 20
pi@pirogue ➜
|